8124 In-Ceiling Loudspeaker – JBL PRO
General Specifications
- Component
- 4 in (100 mm), full-range driver
- Frequency Range
- 60 Hz – 18 kHz
- Sensitivity
- 93 dB (1 kHz – 8 kHz), 1W, 1M
- Coverage
- 130° conical
- 70V/100V Taps
- 6W, 3W, 1.5W (0.75W at 70V only)
- Termination
- Bare wires
- Nominal Driver Impedance
- 8 ohms
- Driver Power Capacity
- 20 W
- Plenum Usage
- Not intended for use in return air plenums
- Included Accessories
- Sculpted Grille
- Optional Accessories
- MTC-8124C C-ring, MTC- Rail tile rails
Dimensions
- Diameter
- 8.1 in (206 mm)
- Depth
- 3.5 in (89 mm)
- Weight
- 2.5 lb (1.2 kg)
- Cutout Dimension
- 175 mm diameter (6.9 in)
Digital Audio Interface MVI-DIG
DOMED HELICAL ANTENNA HA-8091
The HA-8091 Domed Helical Antenna offers unparalleled drop-out free RF performance for IEM, wireless mics and intercoms. Domed Helical Antennas are part of a new generation of antennas that provide greater bandwidth, longer range, greater reliability and more flexibility than other antennas. Unlike traditional whip and other antennas which transmit and receive signals in a single polarization, the circular motion of the RF field emitted by a helical antenna distributes the signal through all possible polarization, greatly reducing the risk of drop-outs. The high gain ensures the strongest possible signal.
Typical antennas for performing artists, whether for IEM or wireless mic applications, often are 1/4 wave whip antennas with a fixed polarization. Any movement of the wireless device and its antenna, with respect to the corresponding receive or transmitter antenna, can result in a polarization shift that can easily cause RF dropouts. With the HA-8091, the RF energy rotates through all 360 degrees of polarization, providing crystal clear reception in the artist’s ears and in the wireless mics receiver no matter how they may move about or where they go on the stage.
This makes the HA-8091 Domed Helical Antenna particularly useful in large scale events, where it may be virtually impossible to control the orientation of both the sending and receiving ends of the wireless communication. It can be used as either a transmitting antenna or a receiving antenna where it excels in either application.
EON ONE COMPACT – JBL PRO
EON208P Packaged 8″ 2-Way PA with Powered 8-Channel Mixer and Bluetooth®
Portable Design
EON208P puts professional audio within arm’s reach—literally. The twin 8” speakers and 8-channel mixer clip together to form the most comprehensive, lightweight and portable PA in its class. Carry it in one hand with a guitar slung over your shoulder to play coffee shops and medium-size gigs. Or turn a backyard into the hottest nightclub around. With uncompromising JBL sound quality and effortless portability, you’ll want to take it everywhere. The versatile enclosures facilitate stacking, pole mounting and use in monitor position.
Head Worn Microphone for Wireless SM35-TQG
About this item
IRX108BT Powered 8-inch Portable PA Loudspeaker With Bluetooth
The JBL IRX108BT portable powered PA loudspeaker delivers class-leading volume and clarity, total ease of use and an unrivaled feature set at our most affordable price point. Sound amazing with a custom, pro-grade system engineered to outperform larger competing systems. Real-world EQ presets let you dial in optimal tone in an instant—no experience necessary—and built-in dbx DriveRack automatic feedback suppression lets you crank it up with confidence. Play music, soundtracks and backing tracks with Bluetooth audio streaming, and ensure your voice carries over background music with one-touch ducking. Two mic/line combo inputs and an XLR loop-out round out this lightweight, durable PA.
KSM44A/SL – MICROPHONE, CONDENSER, MULTIPLE PATTERN
Overview
The KSM44A is a premium, large-diaphragm, side-address condenser microphone with multiple polar pattern options (cardioid, omnidirectional,
bidirectional). The refined and sophisticated design of the KSM44A features an externally biased, dual 1-inch diaphragms, extensive internal pop
filtering and Prethos™ Advanced Preamplifier Technology for a ground-breaking threshold minimum of self-noise. The KSM44A is the premier choice
for the highest level of professional studio and stage performance.
Features
• A milestone technical achievement, Shure’s Prethos™ Advanced Preamplifier Technology provides 4dB of self-noise and max SPL of 131 dB for a
total dynamic range of 127 dB – an increase of 7 dB that defines the new standard for cleanly nuanced audio capture
• Multiple polar patterns–cardioid, omnidirectional and bidirectional–for maximum flexibility in a wide variety of recording applications
• Dual 1 inch, externally biased, ultra-thin, 2.5 μm, 24 Karat gold-layered, low mass diaphragms provide superior transient response
• Class A, discrete, transformerless preamplifier for transparency, extremely wide frequency response and no crossover distortion. Minimizes har
monic and intermodulation distortions.
• Premium electronic components and gold-plated internal and external connectors
• Subsonic filter eliminates rumble from mechanical vibration below 17 Hz.
• Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
• 3-position switchable low-frequency filter helps reduce unwanted stand vibration noise or counteract proximity effect
• Integrated three-stage “pop” protection grille reduces plosives and other breath noise
Loudspeaker, mini pendant, black MXP-1B
Big Audio in a Small Package
Dial In Great Sound
Quick and Easy Installation
Confident Communication
Certified For Success
-
Accessories, MXW NEXT
Access Point/Charger – 2 Ch. MXWAPXD2E-Z11
The next step in audio for hybrid events.
- Built-in charging slots for two MXW1X bodypack, MXW2X handheld, or MXW6X boundary transmitters
- Automatic Frequency Management finds open channels in the 1.9 GHz DECT band and avoids interference without interrupting audio
- Onboard IntelliMix® DSP includes automatic mixing, echo cancellation, noise reduction, and automatic gain control to eliminate annoying distractions
- Presets configure the system for presentations or conferences to send mic & program audio to remote participants, room loudspeakers, or both
- Analog, Dante, and USB-C interfaces for easy connection to a computer, sound system, and videoconferencing codec
- Dual RJ45 network ports allow Dante audio and control signals to be separated for increased security
- External USB-C power supply
SKU: n/a -
Accessories, MXW NEXT
2-CH NETWORKED CHARGING STATION MXWNCS2-E
- Versatile microphone docking: MXWNCS 2 allows handheld, bodypack and boundary transmitters to charge in one port each
- Charge status indicators: 5-segment LED’s on the unit display charge status individually for every docked microphone
- Remote charge status monitoring: Ethernet connection to the system enables remote monitoring of battery charge status in hours and minutes via the control software or third party control systems
- Easy transmitter linking: Assign docked wireless microphones to channels on an Access Point Transceiver by simply pressing “link”
- Rapid charge times: Reaches 50% charge in one hour and fully charges transmitters in two hours
- Overcharge protection: Smart recharging circuitry safeguards against battery damage and extends life cycles
- MXWNCS2 attaches to wall or podium with included mount plate
SKU: n/a -
DSP, Mixers & Network Interfaces
2 CH IN/2 CH OUT – DANTE, 1/3 RU, XLR ANI22-XLR
- Converts up to 2 mic/line analog signals onto a Dante Network
- Converts up to 2 Dante digital audio signals to line/mic analog signals, ANI22BLOCK: Analog audio block connectors (2 in, 2 out); ANI22XLR: Analog audio XLR connectors (2 in, 2 out)
- Power-over-Ethernet (PoE) eliminates need for outboard power supply
- Compact form factor is easy to mount without equipment rack
More flexibility for every kind of application where it is required to get analog audio onto and from a Dante network: The ANI22 Audio Network Interface complements the existing ANI4IN and ANI4OUT products, and is available with XLR and block connectors. It brings up to two line / mic signals onto or from a Dante network for easy audio routing and convenient browser-based remote control.
SKU: n/a -
DSP, Mixers & Network Interfaces
4CH MIC/LINE IN-DNTE+LGC,1/3RU,BLOCK ANI4IN-BLOCK
Powerful audio conversion for any system design
- Single Ethernet port carries Dante audio, power (PoE – class 0)
- LEDs indicate device status and audio signal
- Control strings for third-party preset controllers including Crestron® and AMX®
- 4 Band C/S PEQ on every channel
- Provides channel summing to combine input signals and send them over a single Dante™ channel
- Browser-based software control for all device parameters, per input channel:
- Preamp gain
- Mute control
- Digital gain
- Polarity control
- Phantom power
- 1/3 Rack unit wide
- Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs
- Available in block connector (audio + logic) and standard XLR variations
Converts up to four line / mic analog signals onto a Dante network for easy audio routing and browser-based control.
View the ANI4IN-XLR and ANI4IN-BLOCK Software GUI Demos.
SKU: n/a -
DSP, Mixers & Network Interfaces
4CH MIC/LINE OUT-DNTE,1/3RU,XLR ANI4OUT-XLR
- Single Ethernet port carries Dante audio, power (PoE – class 0)
- LEDs indicate device status and audio signal
- Control strings for third-party preset controllers including Crestron® and AMX®
- 4 Band C/S PEQ on every channel
- Provides channel summing to combine Dante™ signals from the network and send them over a single analog output
- Browser-based software control for all device parameters, per output channel:
- Mute control
- Digital gain
- Polarity control
- 1/3 Rack unit wide
- Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs
- Available in block connector and standard XLR variations
Converts Dante™ digital audio signal to four discrete line / mic analog signals.
SKU: n/a -
DSP, Mixers & Network Interfaces
4CH IN/2CH OUT USB MATRIX MIX,DNTE,BLOCK ANIUSB-MATRIX
- Connects 4 Dante audio inputs and 1 analog input to an A / V conferencing system or a PC-based videoconferencing application
- Flexible signal routing and connectivity: analog audio (1 block in / 1 block out) to room A / V conferencing system; USB (1 in / out) to connect to laptop or room PC
- Power-over-Ethernet (PoE) eliminates the need for an outboard power supply
- Compact form factor is easy to mount without equipment rack
The ANIUSB-MATRIX USB Audio Network Interface complements the existing ANI4IN, ANI4OUT, and ANI22 products. It offers the ideal performance, connectivity, and affordability for audio/video conferencing installations in small and medium-size meeting rooms when a premium microphone solution is desired, and acoustic echo cancellation of an A / V conferencing codec will be used.
The ANIUSB-MATRIX connects 4 Microflex® Advance™ or Microflex® Wireless microphone channels via Dante (4 in / 2 out), and provides analog connectivity (1 block in / 1 block out) to a room audio / video conferencing system or a PC-based A / V conferencing application via USB (1 in / out).
An internal matrix mixer offers flexible routing, allowing users to route any input to any output. A 4-band parametric EQ filter is also available on the analog and USB outputs.
The ANIUSB-MATRIX supports standards-based security protocols to manage access and protect data, including 802.1x, secure boot/storage, and AES encryption for control and audio data.
SKU: n/a -
Accessories
DUAL DOCKING CHARGER FOR SLXD1/2, SB903 SBC203-E
Dual docking recharging station charges two SB903 lithium-ion batteries in or out of their transmitters. Built to charge two batteries, two body pack transmitters, two handheld transmitters or any pairing of two SLX-D transmitters or SB903 batteries.
SKU: n/a -
Accessories
2 BAY NETWORKED DOCKING STATION SBC220-E
- Charging for any combination of up to 2 supported batteries, or transmitters using Shure rechargeable batteries
- Connect up to 4 of any combination of SBC220 and SBC240 units with shared power and network connectivity
- LEDs indicate charge status and battery errors
- Storage mode to prepare batteries for long-term storage
- Network-enabled for remote monitoring with Shure Wireless Workbench
- Supplies full charges in three hours, 50% charge in one hour
- Charge status bi-color LEDs for each battery / transmitter
The SBC220 2-Bay Networked Charging Station enables docked charging and storage for any combination of two sb900b batteries or ULXD1, QLXD1, AD1 (bodypack) or ULXD2, QLXD2 or AD2 (handheld) wireless transmitters. When the connected to a network, the charging status of each transmitter can be viewed remotely while the transmitters are in the charger, using Shure Wireless Workbench® Management software. Up to four SBC220 units can be linked together to share power and network connectivity.
SKU: n/a -
Accessories
ETHERNET CHARGER FOR ADX1, ADX2 SBC240
- Charging for any combination of up to 2 SB910/SB920A batteries or ADX1, ADX2, or ADX2FD transmitters using Shure rechargeable batteries
- Connect up to 4 chargers together to share power and network connections and save space
- LEDs indicate charge status and battery errors
- Storage mode to prepare batteries for long-term storage
- Network-enabled for remote monitoring
SKU: n/a
