8124 In-Ceiling Loudspeaker – JBL PRO
General Specifications
- Component
- 4 in (100 mm), full-range driver
- Frequency Range
- 60 Hz – 18 kHz
- Sensitivity
- 93 dB (1 kHz – 8 kHz), 1W, 1M
- Coverage
- 130° conical
- 70V/100V Taps
- 6W, 3W, 1.5W (0.75W at 70V only)
- Termination
- Bare wires
- Nominal Driver Impedance
- 8 ohms
- Driver Power Capacity
- 20 W
- Plenum Usage
- Not intended for use in return air plenums
- Included Accessories
- Sculpted Grille
- Optional Accessories
- MTC-8124C C-ring, MTC- Rail tile rails
Dimensions
- Diameter
- 8.1 in (206 mm)
- Depth
- 3.5 in (89 mm)
- Weight
- 2.5 lb (1.2 kg)
- Cutout Dimension
- 175 mm diameter (6.9 in)
Digital Audio Interface MVI-DIG
DOMED HELICAL ANTENNA HA-8091
The HA-8091 Domed Helical Antenna offers unparalleled drop-out free RF performance for IEM, wireless mics and intercoms. Domed Helical Antennas are part of a new generation of antennas that provide greater bandwidth, longer range, greater reliability and more flexibility than other antennas. Unlike traditional whip and other antennas which transmit and receive signals in a single polarization, the circular motion of the RF field emitted by a helical antenna distributes the signal through all possible polarization, greatly reducing the risk of drop-outs. The high gain ensures the strongest possible signal.
Typical antennas for performing artists, whether for IEM or wireless mic applications, often are 1/4 wave whip antennas with a fixed polarization. Any movement of the wireless device and its antenna, with respect to the corresponding receive or transmitter antenna, can result in a polarization shift that can easily cause RF dropouts. With the HA-8091, the RF energy rotates through all 360 degrees of polarization, providing crystal clear reception in the artist’s ears and in the wireless mics receiver no matter how they may move about or where they go on the stage.
This makes the HA-8091 Domed Helical Antenna particularly useful in large scale events, where it may be virtually impossible to control the orientation of both the sending and receiving ends of the wireless communication. It can be used as either a transmitting antenna or a receiving antenna where it excels in either application.
EON ONE COMPACT – JBL PRO
EON208P Packaged 8″ 2-Way PA with Powered 8-Channel Mixer and Bluetooth®
Portable Design
EON208P puts professional audio within arm’s reach—literally. The twin 8” speakers and 8-channel mixer clip together to form the most comprehensive, lightweight and portable PA in its class. Carry it in one hand with a guitar slung over your shoulder to play coffee shops and medium-size gigs. Or turn a backyard into the hottest nightclub around. With uncompromising JBL sound quality and effortless portability, you’ll want to take it everywhere. The versatile enclosures facilitate stacking, pole mounting and use in monitor position.
Head Worn Microphone for Wireless SM35-TQG
About this item
IRX108BT Powered 8-inch Portable PA Loudspeaker With Bluetooth
The JBL IRX108BT portable powered PA loudspeaker delivers class-leading volume and clarity, total ease of use and an unrivaled feature set at our most affordable price point. Sound amazing with a custom, pro-grade system engineered to outperform larger competing systems. Real-world EQ presets let you dial in optimal tone in an instant—no experience necessary—and built-in dbx DriveRack automatic feedback suppression lets you crank it up with confidence. Play music, soundtracks and backing tracks with Bluetooth audio streaming, and ensure your voice carries over background music with one-touch ducking. Two mic/line combo inputs and an XLR loop-out round out this lightweight, durable PA.
KSM44A/SL – MICROPHONE, CONDENSER, MULTIPLE PATTERN
Overview
The KSM44A is a premium, large-diaphragm, side-address condenser microphone with multiple polar pattern options (cardioid, omnidirectional,
bidirectional). The refined and sophisticated design of the KSM44A features an externally biased, dual 1-inch diaphragms, extensive internal pop
filtering and Prethos™ Advanced Preamplifier Technology for a ground-breaking threshold minimum of self-noise. The KSM44A is the premier choice
for the highest level of professional studio and stage performance.
Features
• A milestone technical achievement, Shure’s Prethos™ Advanced Preamplifier Technology provides 4dB of self-noise and max SPL of 131 dB for a
total dynamic range of 127 dB – an increase of 7 dB that defines the new standard for cleanly nuanced audio capture
• Multiple polar patterns–cardioid, omnidirectional and bidirectional–for maximum flexibility in a wide variety of recording applications
• Dual 1 inch, externally biased, ultra-thin, 2.5 μm, 24 Karat gold-layered, low mass diaphragms provide superior transient response
• Class A, discrete, transformerless preamplifier for transparency, extremely wide frequency response and no crossover distortion. Minimizes har
monic and intermodulation distortions.
• Premium electronic components and gold-plated internal and external connectors
• Subsonic filter eliminates rumble from mechanical vibration below 17 Hz.
• Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
• 3-position switchable low-frequency filter helps reduce unwanted stand vibration noise or counteract proximity effect
• Integrated three-stage “pop” protection grille reduces plosives and other breath noise
Loudspeaker, mini pendant, black MXP-1B
Big Audio in a Small Package
Dial In Great Sound
Quick and Easy Installation
Confident Communication
Certified For Success
-
Accessories
DB15 Back Plate for ADX5D ADX5BP-DB15
- DB15 Backplate for the Axient Digital ADX5D dual-channel portable wireless receiver
- For DB15 slot-in connector situations, such as professional broadcast video cameras
- DB15 D-Sub connector type for audio and power
- Multiple output configurations: If only one audio channel is available, the ADX5D 3.5mm connector can be used to output audio in various configurations.
- Captive Phillips head screws provide simple installation to the ADX5D
- Spacer included for proper fit when needed
SKU: n/a -
Accessories
Dual TA3 Back Plate for ADX5D ADX5BP-TA3
- TA3 Backplate for the Axient Digital ADX5D dual-channel portable wireless receiver
- 2 x TA3 analog outputs
- Output 1 can be configured as two-channel AES3 digital outputs (Output 2 is disabled when AES3 is selected)
- 1 x 4-pin power connector for battery sled use
- 1 x Hirose 4-pin power connector
- Input voltage: 6V DC to 18V DC
- Captive Phillips head screws provide simple installation to the ADX5D
- Compatible with the Shure WA451 audio cable (TA3F-to-XLR)
SKU: n/a -
Accessories
AA Battery Sled for ADX5D ADX5BS-AA
- AA battery Sled for Axient Digital ADX5D dual-channel portable wireless receiver
- Compatible with AA batteries (standard alkaline or rechargeable)
- If rechargeable AA batteries are used, ADX5BS-AA does not charge batteries
- Must be used with ADX5BP-TA3 backplate (purchased separately)
SKU: n/a -
Accessories
L-Type Battery Sled for ADX5D ADX5BS-L
- Battery Sled for Axient Digital ADX5D dual-channel portable wireless receiver
- Compatible with L-type batteries
- Can power with one or two L-type batteries at a time, which allows for hot swapping of one battery while in use
- Battery Sled does not charge batteries (external charger is needed)
- Must be used with ADX5BP-TA3 backplate (purchased separately)
SKU: n/a -
Wireless System
ADX5D Portable Receiver, 470-636MHz ADX5D-A
- Dual-channel slot-in portable wireless receiver
- Impeccable audio quality
- Wide tuning range up to 184 MHz (region dependent)
- High spectral efficiency due to advanced digital modulation scheme offers more wireless channels in available RF space
- High Density (HD) mode provides even higher spectral efficiency (application dependent)
- True digital diversity reception per channel for drop-out resistance and excellent range
- Networked control with Wireless Workbench® software and ShurePlus™ Channels app
- 5-segment Channel Quality meters display per-channel RF link quality
- ADX series receiver with ShowLink Direct Mode allows remote control of Axient Digital transmitters without the need of external equipment*
- Third-party integration and control from select portable mixers and recorders for RF scan and deployment, audio gain adjustments, transmitter battery life monitoring, and more.*
- Party Dial feature enables users to quickly switch between RF channels from a pre-selected group of frequencies
- Optimized Menu Structure places the most commonly used features within a few clicks of each other
- Enhanced Shortcut Menu provides rapid access to only a few critical features and menus
- Aux 3.5mm audio output provide connection to headphones or to a balanced line-level input
- Accessory Mount with cold shoe adapter (sold separately)
- Removable antennas with standard SMA connectors
- High-resolution OLED display
- USB-C port for firmware upgrades
- Streamline user interface
- Low latency, down to 2 milliseconds
The dual-channel ADX5D portable wireless receiver sets a new standard in spectral efficiency. Groundbreaking performance features include wide tuning, low latency, and High Density (HD) mode, ensuring solid performance in the most challenging RF environment. As an Axient Digital ADX Series wireless receiver, the ADX5D features ShowLink® Direct Mode that allows remote control of Axient Digital transmitters without the need of external equipment.* Robust RF. Impeccable audio. Axient Digital quality and performance. All in a portable, slot-in receiver design. Premium portable wireless.
Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
* Country-Specific Functionality Restrictions
SKU: n/a -
-
Wireless System
ULTRA WIDEBAND ANT/PWR DIST SYSTEM UA845UWB/LC-E
Active Antenna/Power Distribution System, five-way, wideband VHF and UHF, internal power supply. Five-Way Active Antenna Splitter and Power Distribution System for U4S, UR4S, U4D, and UR4D receivers, AD4, ULXD4, UXLD4D, ULXD4Q receivers, SLX4, BLXR4 and QLXD4 receivers.
The Shure Model UA845UWB is an amplified, VHF and UHF Antenna Distribution System that expands a wireless microphone system by splitting one pair of antennas to multiple Shure Axient Digital, UHF-R, ULX-D, BLX4R, SLX4 and BLX4R. It also amplifies RF signals to compensate for insertion loss due to splitting signal power to multiple output connectors. Each UA845UWB allows up to four receivers to use the same antennas. CASCADE connectors allow connections to a fifth receiver or a second UA845UWB.
Expandability. The UA845UWB Antenna Distribution System is designed for large Axient Digital, UHF-R, ULX-D™, QLX-D, SLX, BLX4R wireless systems. Each unit allows up to four wireless receivers to use the same two antennas, and the CASCADE ports allow connection to a fifth receiver or a second UA845UWB.
Compatibility. The UA845UWB is compatible with all Shure Axient Digital, UHF-R, ULX-D, SLX, BLX4R, QLX-D wireless microphone receivers operating within a compatible frequency range (see UHF Carrier Frequency Ranges in the Specifications section).
CASCADE Ports. Two 50 Ω, BNC-type antenna CASCADE ports allow an additional UA845UWB unit or a fifth wireless receiver. A large wireless system can be run off of a single pair of antennas.
Power OUTPUT and OUT Connectors for Shure UHF and UHF-R® Wireless systems. Up to five U4 or UR4 receivers can be daisy-chained and powered from a single source via the Power OUTPUT connectors. DOES NOT APPLY TO ULX or ULX-D.
Active Antenna/Power Distribution System, five-way, VHF, UHF, 1.2, 1.5, and 1.8 GHz, internal power supply.
UA845UWB is also available without cable.
SKU: n/a -
Wireless System
P10TE=-K10E WIRELESS TRANSMITTER P10TE-K10E
The P10TE is a network-ready, professional dual radio transmitter. Compatible with the P10R bodypack receiver, it is part of the PSM 1000 in-ear monitoring system. It features innovative technology such as Scan and Sync and RF Mute for fast setup and intuitive operation. The built-in Ethernet port makes the transmitter networkable and it can be controlled on a computer using Wireless Workbench Software 6.0. Balanced jack and XLR connectors, a loop out and a headphone jack are provided. Furthermore, the P10TE is compatible with the P9RA receiver of the PSM 900 system.
SKU: n/a -
Conference & Discussion Systems, MXW NEXT
BODYPACK TRANSCEIVER W-BUILT-IN OMNI MIC MXW1/O-Z11
- Compact, low-profile design: Fits comfortably into a shirt pocket or attached to clothing
- Integrated omnidirectional mic: Clearly captures full-range audio without connecting an external microphone
- External microphone input: For connecting multiple styles of earworn or lavalier condenser microphones
- Bi-directional wireless: Enables return channel audio and real-time remote control of all wireless microphone settings
- Earphone output: Listen to audio from a return channel for translation, cueing, or program material
- Programmable mute button: Customize local or remote muting behavior per application, with options including push-to-talk, push-to-mute, and external control
- Standby mode: Enabled remotely during breaks or periods of inactivity to significantly extend battery life when not in use
- Wide working range: Reliable wireless coverage extends up to 160 feet (50 meters)
- Out-of-range alert: Emits beeping sound when range is exceeded
- Wide frequency response: Captures full-range audio for clear voice transmission
- Easy transmitter linking: Assign the microphone to an access point channel by simply docking it into a networked charging station and pressing “Link”
- Encrypted wireless: AES 256-bit encryption for secure transmission
- Advanced Li-ion batteries: Smart lithium-ion internal batteries provide up to 9 hours of continuous use, charge fully in 2 hours, and allow remote monitoring over the network of remaining runtime and charge status in hours and minutes
- USB charging: Connects to any standard USB power source for “always on” usage. Charge time using SBC-USB adapter: <3.5 hours while mic is in use
MXW1 features an integrated microphone perfect for picking up speech while the bodypack is on a lanyard or tucked into a shirt pocket. A belt clip is included for attachment to clothing.
All Microflex Wireless transmitters deliver vivid lifelike sound, intelligent wireless performance, encrypted transmission, and advanced rechargeability for conferencing and presentation applications.
SKU: n/a -
Conference & Discussion Systems, MXW NEXT
HH TRANSMITTER WITH SM58 MXW2/SM58-Z11
- Dual transmit antennas: Maximizes transmission strength depending on hand placement
- Bi-directional wireless: Enables real-time remote control of all wireless microphone settings
- Programmable mute button: Allows customization of local or remote muting behavior per application, with options including push-to-talk, push-to-mute, and external control
- Standby mode: Enabled remotely during breaks or periods of inactivity to significantly extend battery life when not in use
- Wide working range: Reliable wireless coverage extends up to 160 feet (50 meters)
- Range warning alert: Emits beeping sound when range limit is exceeded
- Easy transmitter linking: Assign the microphone to an access point channel by simply docking it into a networked charging station and pressing “Link”
- Encrypted wireless: AES 256-bit encryption for secure transmission
- Advanced Li-ion batteries: Smart lithium-ion internal batteries provide up to 9 hours of continuous use, charge fully in 2 hours, and enable remote monitoring over the network of remaining runtime and charge status in hours and minutes
- USB charging: Connects to any standard USB power source for “always on” usage. Charge time using SBC-USB adapter: <3.5 hours while mic is in use
- Anti-roll design: Features a flat resting point to prevent the microphone from accidentally rolling off a flat surface
Featuring lightweight yet durable construction, MXW2/SM58 delivers vivid lifelike sound, intelligent wireless performance, encrypted transmission, and advanced rechargeability for conferencing and presentation applications.
All Microflex Wireless transmitters deliver vivid lifelike sound, intelligent wireless performance, encrypted transmission, and advanced rechargeability for conferencing and presentation applications.
SKU: n/a -
Accessories, MXW NEXT
BOUNDARY MICROPHONE TRANSCEIVER, CARDIOD MXW6/C-Z11
- Available in two colors with two different polar patterns:
- MXW6/O: Black, Omnidirectonal ( R183B capsule)
- MXW6W/O: White, Omnidirectonal ( R183B capsule)
- MXW6/C: Black, Cardioid (R185B capsule)
- MXW6W/C: White, Cardioid (R185B capsule)
Coverage options: Available in cardioid or omnidirectional polar patterns
- Wide frequency response: Full range audio for clear voice transmission
- Microflex capsules: Well known and trusted Microflex sound signature
- Bi-directional wireless: Enables return channel audio and real time remote control of all wireless microphone settings
- Earphone output: Listen to audio from a return channel for translation, cueing, or program material
- Concealed power switch: Prevents accidental powering off
- Programmable mute button: Customise local or remote muting behavior per application, with options including push-to-talk, push-to-mute, and external control
- Encrypted wireless: AES 256-bit encryption for secure transmission
- Wide working range: Reliable wireless coverage extends up to 160 feet (50 meters)
- Out of range alert: Emits beeping sound when range limit is exceeded
- Easy wireless linking: Assign the microphone to an Access Point channel by simply docking it in a Networked Charging Station and pressing “link”
- Advanced Li-ion batteries: Smart lithium-ion internal batteries (included) provide up to 9 hours of continuous use, charge to full in 2 hours, and enable remote monitoring over the network of remaining runtime and charge status in hours and minutes
- Standby mode: Enabled remotely during periods of inactivity to significantly extend battery life when not in use
- Low-battery LED: Visually alerts when there is 30 minutes of charge remaining
- USB charging: Connects to any standard USB power source for “always on” usage
SKU: n/a - Available in two colors with two different polar patterns:
-
Accessories, MXW NEXT
Networked Dock – 4 Bay – Gooseneck MXWNDX4GE
- MXW neXt transmitters can be linked to an associated MXWAPX4 or MXWAPX8 Access Point Transceiver simply by pressing the Link button while the transmitter is in the charger (or via the linking workflow in the CUI). Battery statistics can be shared with networked control software.
- The charging station automatically checks battery health including the number of lifetime charge/discharge cycles. Integration with additional MXW neXt hardware and Shure Designer software enables monitoring and control tailored to your specific application.
SKU: n/a -
Accessories, MXW NEXT
Networked Dock – 8 Bay – Gooseneck MXWNDX8GE
- MXW neXt transmitters can be linked to an associated MXWAPX4 or MXWAPX8 Access Point Transceiver simply by pressing the Link button while the transmitter is in the charger (or via the linking workflow in the CUI). Battery statistics can be shared with networked control software.
- The charging station automatically checks battery health including the number of lifetime charge/discharge cycles. Integration with additional MXW neXt hardware and Shure Designer software enables monitoring and control tailored to your specific application.
SKU: n/a
