4CH MIC/LINE IN-DNTE+LGC,1/3RU,BLOCK ANI4IN-BLOCK
Powerful audio conversion for any system design
- Single Ethernet port carries Dante audio, power (PoE – class 0)
- LEDs indicate device status and audio signal
- Control strings for third-party preset controllers including Crestron® and AMX®
- 4 Band C/S PEQ on every channel
- Provides channel summing to combine input signals and send them over a single Dante™ channel
- Browser-based software control for all device parameters, per input channel:
- Preamp gain
- Mute control
- Digital gain
- Polarity control
- Phantom power
- 1/3 Rack unit wide
- Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs
- Available in block connector (audio + logic) and standard XLR variations
Converts up to four line / mic analog signals onto a Dante network for easy audio routing and browser-based control.
View the ANI4IN-XLR and ANI4IN-BLOCK Software GUI Demos.
12.700,00 د.م.
Produits similaires
-
DSP, Mixers & Network Interfaces
ZonePRO 640m – 6×4 Digital Zone Processor
Features
- 6 Inputs / 4 Outputs
- 4 Balanced Mic/Line Inputs
- 2 Unbalanced, Mono-Summed RCA Input Pairs
- Microphone Gain per Channel
- Pre-Configured Architecture
- Two Configurable Input Insert Positions
- One Configurable Output Insert Position
- AutoWarmth® per Output Zone
- Link Bus
- Comprehensive Signal Metering
- Front Panel LCD
- User-Specified Front Panel Control
- Optional ZC Controllers
- Ethernet Control
- Serial Control
- Third Party Control
- Wizard-Driven Configuration
SKU: n/a -
DSP, Mixers & Network Interfaces
2 CH IN/2 CH OUT – DANTE, 1/3 RU, XLR ANI22-XLR
- Converts up to 2 mic/line analog signals onto a Dante Network
- Converts up to 2 Dante digital audio signals to line/mic analog signals, ANI22BLOCK: Analog audio block connectors (2 in, 2 out); ANI22XLR: Analog audio XLR connectors (2 in, 2 out)
- Power-over-Ethernet (PoE) eliminates need for outboard power supply
- Compact form factor is easy to mount without equipment rack
More flexibility for every kind of application where it is required to get analog audio onto and from a Dante network: The ANI22 Audio Network Interface complements the existing ANI4IN and ANI4OUT products, and is available with XLR and block connectors. It brings up to two line / mic signals onto or from a Dante network for easy audio routing and convenient browser-based remote control.
SKU: n/a -
DSP, Mixers & Network Interfaces
NETWORKED DANTE LOW IMP/70V POE+ AMP MXN-AMP
Powerfully Simple
- Can power up to 4 MXP loudspeakers in 8 ohm mode, or up to 8 MXP-5/MXP-6 loudspeakers in 70V mode.
- Rated at 14.5 watts of combined output power.
Unmatched I/O Flexibility
- Four Dante inputs and four Dante outputs.
- Unbalanced stereo analog audio input.
- Logic input (switches between presets 1 and 2 as defined in web UI).
Dial In Great Sound
- Onboard Shure DSP utilities include EQ, delay, limiter, and signal/tone generator.
- Presets for all MXP-series loudspeakers ensure optimal audio performance. Custom presets can be defined in the MXN-AMP control software.
Easy Installation
- Can be rack mounted with available CRT-1 rack tray.
- Can also be wall or ceiling mounted. (Note: Shure recommends the use of an additional safety tether for overhead components).
- UL 2043 Plenum rated.
Confident Communication
- Supports standards-based security protocols to manage access and protect data, including 802.1x, secure boot/storage, and AES encryption for control and audio data.
- Shure Audio Encryption keeps audio content protected between the MXN-AMP and other Shure Microflex® Ecosystem devices in the room.
Certified For Success
- Seamless connectivity and compatibility with popular collaboration platforms, including Microsoft Teams
SKU: n/a -
DSP, Mixers & Network Interfaces
4CH MIC/LINE OUT-DNTE,1/3RU,XLR ANI4OUT-XLR
- Single Ethernet port carries Dante audio, power (PoE – class 0)
- LEDs indicate device status and audio signal
- Control strings for third-party preset controllers including Crestron® and AMX®
- 4 Band C/S PEQ on every channel
- Provides channel summing to combine Dante™ signals from the network and send them over a single analog output
- Browser-based software control for all device parameters, per output channel:
- Mute control
- Digital gain
- Polarity control
- 1/3 Rack unit wide
- Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs
- Available in block connector and standard XLR variations
Converts Dante™ digital audio signal to four discrete line / mic analog signals.
SKU: n/a -
DSP, Mixers & Network Interfaces
P300-IMX : AUDIO CONFERENCING PROCESSOR
Don’t let echo, noise, or distortion take over the meeting. The IntelliMix® P300 enhances every aspect of conference audio. Combined with Microflex® Advance™ or Microflex® Wireless microphones, the clear sound reproduction and intelligent mixing keeps the agenda on track with clear communication.
SKU: n/a
