Recommended Products
CARDIOID LG DIAPHGRM CONDSR VOCAL MIC KSM42/SG
This premium side-address, cardioid condenser microphone features a large dual-diaphragm capsule, optimized for world-class vocal recording and
performance applications. With a tailored frequency response and extensive internal and external pop filtering, the single-pattern, dual-diaphragm
design of the KSM42 exhibits exceptionally smooth proximity control and ultra-wide dynamic range. The KSM42 is the premier choice for capturing
sophisticated, powerful and intimate vocal performances.
• Highly consistent cardioid polar pattern creates a broad “sweet spot” and natural off-axis response
• Dual-diaphragm design with an active front, ultra thin (2.5 micron) 24-karat gold, low mass, 1-inch Mylar® diaphragm
• Passive back diaphragm delivers exceptional control of low frequency proximity effect
• Tailored low-frequency roll-off minimizes low frequency room noise
• Integrated three-stage mesh grille guards against wind and breath noise
• Open cage ShureLock® rubber suspension shock mount with low-profile Popper Stopper™ magnetic pop filter produces a natural space between
performer and microphone
• Prethos™ Advanced Preamplifier Technology exhibits extremely low self-noise with superior dynamic range, transient response and ultra-low
distortion for transparent recording
• Premium electronic components and gold-plated internal and external connectors
• Durable zinc die-cast housing and hardened low carbon steel grille
• Internal shock mount to reduce unwanted handling and stand noise
BLX188 DUAL LAV SYSTEM W/SM31 BLX188E/SM31-H8E
The Shure BLX188/SM31 Wireless Dual Fitness Headset System combines professional-quality sound with simple setup and and up to 14 hours battery life for great audio performance for two presenters right out of the box. The system includes BLX88 tabletop dual-channel receiver, 2 SM31FH headset microphones with BLX1 bodypack transmitters, lavalier clips, power supply, 2 sets of AA batteries, windscreens and user guide.
Shure MoveMic One : Micro cravate sans fil
SKU : MV-ONE-Z6
Shure Movemic – Le micro compact et polyvalent pour une qualité audio exceptionnelle. Idéal pour les vlogueurs, musiciens et podcasteurs, il vous accompagne partout grâce à son design portable. Capturez chaque détail sonore avec une précision inégalée.
Shure MoveMic Two : Micro cravate sans fil 2 canaux
SKU : MV-TWO-Z6
Shure Movemic Two – Le micro stéréo compact pour des enregistrements immersifs et de haute qualité. Conçu pour les créateurs de contenu, musiciens et podcasteurs exigeants, il offre une performance sonore exceptionnelle avec une portabilité optimale.
Shure Movemic Two Kit : Micro cravate sans fil 2 canaux + récepteur
Shure Movemic Two Kit – Le kit sans fil complet pour des enregistrements stéréo professionnels en toute liberté. Conçu pour les créateurs de contenu, musiciens et podcasteurs, il offre une qualité sonore exceptionnelle avec une flexibilité maximale.
SKU : MV-TWO-KIT-Z6
Shure MV6 – Mic pour gaming et podcast
SKU: MV6
Le Shure MV6 est un microphone USB dynamique conçu pour les gamers et streamers. Avec son Auto Level Mode et une qualité sonore professionnelle, il offre une solution audio fiable et facile à utiliser pour une expérience de diffusion optimale.
MV7i – Microphone Dynamique (interface intégrée)
Entrez dans une nouvelle ère d’enregistrement avec le MV7i, un microphone intelligent incluant une interface.
Premier microphone USB de sa catégorie, avec interface audio intégrée, il simplifie l’enregistrement de deux canaux sur les ordinateurs, tablettes et smartphones.



Shop
Affichage de 1–24 sur 321 résultats
-
Accessories
2 BAY NETWORKED DOCKING STATION SBC220-E
- Charging for any combination of up to 2 supported batteries, or transmitters using Shure rechargeable batteries
- Connect up to 4 of any combination of SBC220 and SBC240 units with shared power and network connectivity
- LEDs indicate charge status and battery errors
- Storage mode to prepare batteries for long-term storage
- Network-enabled for remote monitoring with Shure Wireless Workbench
- Supplies full charges in three hours, 50% charge in one hour
- Charge status bi-color LEDs for each battery / transmitter
The SBC220 2-Bay Networked Charging Station enables docked charging and storage for any combination of two sb900b batteries or ULXD1, QLXD1, AD1 (bodypack) or ULXD2, QLXD2 or AD2 (handheld) wireless transmitters. When the connected to a network, the charging status of each transmitter can be viewed remotely while the transmitters are in the charger, using Shure Wireless Workbench® Management software. Up to four SBC220 units can be linked together to share power and network connectivity.
SKU: n/a -
DSP, Mixers & Network Interfaces
2 CH IN/2 CH OUT – DANTE, 1/3 RU, XLR ANI22-XLR
- Converts up to 2 mic/line analog signals onto a Dante Network
- Converts up to 2 Dante digital audio signals to line/mic analog signals, ANI22BLOCK: Analog audio block connectors (2 in, 2 out); ANI22XLR: Analog audio XLR connectors (2 in, 2 out)
- Power-over-Ethernet (PoE) eliminates need for outboard power supply
- Compact form factor is easy to mount without equipment rack
More flexibility for every kind of application where it is required to get analog audio onto and from a Dante network: The ANI22 Audio Network Interface complements the existing ANI4IN and ANI4OUT products, and is available with XLR and block connectors. It brings up to two line / mic signals onto or from a Dante network for easy audio routing and convenient browser-based remote control.
SKU: n/a -
Accessories, MXW NEXT
2-CH NETWORKED CHARGING STATION MXWNCS2-E
- Versatile microphone docking: MXWNCS 2 allows handheld, bodypack and boundary transmitters to charge in one port each
- Charge status indicators: 5-segment LED’s on the unit display charge status individually for every docked microphone
- Remote charge status monitoring: Ethernet connection to the system enables remote monitoring of battery charge status in hours and minutes via the control software or third party control systems
- Easy transmitter linking: Assign docked wireless microphones to channels on an Access Point Transceiver by simply pressing “link”
- Rapid charge times: Reaches 50% charge in one hour and fully charges transmitters in two hours
- Overcharge protection: Smart recharging circuitry safeguards against battery damage and extends life cycles
- MXWNCS2 attaches to wall or podium with included mount plate
SKU: n/a -
Accessories
4-BAY CHARGER FOR ADXR, NO PWR SUP SBC441
Powered by Shure WMAS innovation*, Axient Digital PSM transforms in-ear monitoring with its unparalleled wireless quality and flexibility, enabling engineers and artists to set new benchmarks for creativity in live performances.
Welcome to a new era of live performance with Axient Digital PSM.
*The availability of WMAS features is subject to regional regulations and may vary accordingly. Contact your Shure local representative for specific details in your area.
- 4-bay docking charger for use with Axient Digital PSM
- Compatible with Shure SB910 rechargeable batteries and Axient Digital PSM ADXR bodypack receivers
- Dual network ports for monitoring and network pass-through
- A single power supply supports two chargers
SKU: n/a -
DSP, Mixers & Network Interfaces
4CH IN/2CH OUT USB MATRIX MIX,DNTE,BLOCK ANIUSB-MATRIX
- Connects 4 Dante audio inputs and 1 analog input to an A / V conferencing system or a PC-based videoconferencing application
- Flexible signal routing and connectivity: analog audio (1 block in / 1 block out) to room A / V conferencing system; USB (1 in / out) to connect to laptop or room PC
- Power-over-Ethernet (PoE) eliminates the need for an outboard power supply
- Compact form factor is easy to mount without equipment rack
The ANIUSB-MATRIX USB Audio Network Interface complements the existing ANI4IN, ANI4OUT, and ANI22 products. It offers the ideal performance, connectivity, and affordability for audio/video conferencing installations in small and medium-size meeting rooms when a premium microphone solution is desired, and acoustic echo cancellation of an A / V conferencing codec will be used.
The ANIUSB-MATRIX connects 4 Microflex® Advance™ or Microflex® Wireless microphone channels via Dante (4 in / 2 out), and provides analog connectivity (1 block in / 1 block out) to a room audio / video conferencing system or a PC-based A / V conferencing application via USB (1 in / out).
An internal matrix mixer offers flexible routing, allowing users to route any input to any output. A 4-band parametric EQ filter is also available on the analog and USB outputs.
The ANIUSB-MATRIX supports standards-based security protocols to manage access and protect data, including 802.1x, secure boot/storage, and AES encryption for control and audio data.
SKU: n/a -
DSP, Mixers & Network Interfaces
4CH MIC/LINE IN-DNTE+LGC,1/3RU,BLOCK ANI4IN-BLOCK
Powerful audio conversion for any system design
- Single Ethernet port carries Dante audio, power (PoE – class 0)
- LEDs indicate device status and audio signal
- Control strings for third-party preset controllers including Crestron® and AMX®
- 4 Band C/S PEQ on every channel
- Provides channel summing to combine input signals and send them over a single Dante™ channel
- Browser-based software control for all device parameters, per input channel:
- Preamp gain
- Mute control
- Digital gain
- Polarity control
- Phantom power
- 1/3 Rack unit wide
- Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs
- Available in block connector (audio + logic) and standard XLR variations
Converts up to four line / mic analog signals onto a Dante network for easy audio routing and browser-based control.
View the ANI4IN-XLR and ANI4IN-BLOCK Software GUI Demos.
SKU: n/a -
DSP, Mixers & Network Interfaces
4CH MIC/LINE OUT-DNTE,1/3RU,XLR ANI4OUT-XLR
- Single Ethernet port carries Dante audio, power (PoE – class 0)
- LEDs indicate device status and audio signal
- Control strings for third-party preset controllers including Crestron® and AMX®
- 4 Band C/S PEQ on every channel
- Provides channel summing to combine Dante™ signals from the network and send them over a single analog output
- Browser-based software control for all device parameters, per output channel:
- Mute control
- Digital gain
- Polarity control
- 1/3 Rack unit wide
- Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs
- Available in block connector and standard XLR variations
Converts Dante™ digital audio signal to four discrete line / mic analog signals.
SKU: n/a -
Instrument Mics
54PC DRUMKIT PGA52, 57, 56 (X2) PGADRUMKIT4
- 1 x PGA52 Cardioid Dynamic Kick Drum Microphone
- 3 x PGA56 Cardioid Dynamic Microphone for Snare/Tom
- 1 x PGA57 Cardioid Dynamic Instrument Microphone
- 2 x PGA81 Cardioid Condenser Instrument Microphone
- 3 x A25D Mic Clamp
- 3 x AP56DM Circle Stand for Mounting on Drum Shells
- 7 x XLR-XLR Cables 4.6m
- 1 x Carrying Case
SKU: n/a -
Instrument Mics
66PC DRUMKIT PGA52, 57, 56(X2), 81(X2) PGADRUMKIT6
The PGADRUMKIT7 Drum Microphone Kit is a complete set of professional-grade microphones, designed to provide excellent sound for performance and battery recording. The PGADRUMKIT7 includes a PGA52 drum microphone, three PGA56 drum microphones, a PGA57 instrument microphone, and two PGA81 instrument microphones, as well as three drum stands, seven XLR-XLR cables, and a carrying case.
- 1 x PGA52 Cardioid Dynamic Kick Drum Microphone
- 3 x PGA56 Cardioid Dynamic Microphone for Snare/Tom
- 1 x PGA57 Cardioid Dynamic Instrument Microphone
- 2 x PGA81 Cardioid Condenser Instrument Microphone
- 3 x A25D Mic Clamp
- 3 x AP56DM Circle Stand for Mounting on Drum Shells
- 7 x XLR-XLR Cables 4.6m
- 1 x Carrying Case
SKU: n/a -
Instrument Mics
7PC DRUMKIT PGA52, 57, 56(X3), 81(X2) PGADRUMKIT7
The PGADRUMKIT7 Drum Microphone Kit is a complete set of professional-grade microphones, designed to provide excellent sound for performance and battery recording. The PGADRUMKIT7 includes a PGA52 drum microphone, three PGA56 drum microphones, a PGA57 instrument microphone, and two PGA81 instrument microphones, as well as three drum stands, seven XLR-XLR cables, and a carrying case.
- 1 x PGA52 Cardioid Dynamic Kick Drum Microphone
- 3 x PGA56 Cardioid Dynamic Microphone for Snare/Tom
- 1 x PGA57 Cardioid Dynamic Instrument Microphone
- 2 x PGA81 Cardioid Condenser Instrument Microphone
- 3 x A25D Mic Clamp
- 3 x AP56DM Circle Stand for Mounting on Drum Shells
- 7 x XLR-XLR Cables 4.6m
- 1 x Carrying Case
SKU: n/a -
Accessories
8-BAY BATTERY CHARGER FOR SB903 SBC80-903-E
The SBC80-903 is an 8-bay charging station for up to eight (8) SB903 rechargeable lithium ion batteries. The charging cradle is designed to fit in a rackmount drawer and provides a full charge for installed batteries in 3 hours. LED indicators illuminate to indicate battery health and charging status.
SKU: n/a -
Wireless System
8-CH ANTENNA COMBINER 470-865 MHZ PA821B-E
- Combines up to eight PSM transmitters to a single antenna set for improved RF networking & reduced rack clutter
- Wideband operation (470-865 MHz)
- Quieter fan for significant reductions in ambient unit noise – especially useful for installation work
- Temperature-sensitive fan power for significant reductions in ambient unit heat
- 8 Input LED Signals (green when active; off when inactive)
- LED indications of signal presence, signal overload
The PA821B active broadband antenna combiner streamlines the simultaneous operation of many PSM systems at a venue. The PA821B combines the RF outputs from up to eight PSM transmitters into one RF output to feed a single transmit antenna. This provides significantly improved reception quality due to reduced intermodulation distortion and dropouts due to multipath interference.
The PA821B is compatible with the wireless personal monitors Shure PSM 300, PSM 900 and PSM 1000.
SKU: n/a -
Installed Speakers
8124 In-Ceiling Loudspeaker – JBL PRO
General Specifications
- Component
- 4 in (100 mm), full-range driver
- Frequency Range
- 60 Hz – 18 kHz
- Sensitivity
- 93 dB (1 kHz – 8 kHz), 1W, 1M
- Coverage
- 130° conical
- 70V/100V Taps
- 6W, 3W, 1.5W (0.75W at 70V only)
- Termination
- Bare wires
- Nominal Driver Impedance
- 8 ohms
- Driver Power Capacity
- 20 W
- Plenum Usage
- Not intended for use in return air plenums
- Included Accessories
- Sculpted Grille
- Optional Accessories
- MTC-8124C C-ring, MTC- Rail tile rails
Dimensions
- Diameter
- 8.1 in (206 mm)
- Depth
- 3.5 in (89 mm)
- Weight
- 2.5 lb (1.2 kg)
- Cutout Dimension
- 175 mm diameter (6.9 in)
SKU: n/a -
Accessories
AA Battery Sled for ADX5D ADX5BS-AA
- AA battery Sled for Axient Digital ADX5D dual-channel portable wireless receiver
- Compatible with AA batteries (standard alkaline or rechargeable)
- If rechargeable AA batteries are used, ADX5BS-AA does not charge batteries
- Must be used with ADX5BP-TA3 backplate (purchased separately)
SKU: n/a -
Conference & Discussion Systems, MXW NEXT
Access Point – 4 Ch. MXWAPX4-Z11
Key Points
The MXWAPX4=-Z11 is a 4-channel access point (transceiver) for use with MXW neXt wireless transmitters.
– Analog, Dante, and USB-C audio connections.
– Onboard IntelliMix audio DSP with automatic mixing, echo cancellation, noise reduction, automatic gain and EQ control.
– Automatic frequency management function scans the spectrum, selects an available channel, and automatically changes channels in case of interference.Overview
The MXW neXt wireless microphone system is a new step in audio for hybrid events. With state-of-the-art wireless transmission, convenient charging, powerful audio processing, and flexible controls and connections, it’s the most versatile wireless audio solution for collaboration. The Microflex® Wireless neXt system is the perfect solution for flexible meeting rooms where seating configurations can change, rooms where audio cables are not practical or rooms that are only used occasionally.
Details
Isn’t every event partly hybrid today?
Nowadays, every meeting, course, or training session includes a mix of in-person and remote participants. The MXW neXt wireless microphone system delivers pristine sound to those in the room and those connecting remotely, whether it’s a presentation, a team meeting, or a training session.
The MXW neXt eliminates annoying audio cables, allowing you to place microphones wherever you want, whenever you want. Wireless microphones fit any table layout or meeting format, whether it’s a presentation, a group discussion, or a board meeting.
With a choice of rechargeable microphones that eliminate the need for disposable batteries, powerful IntelliMix DSP for exceptional sound quality, and the ability to extend audio coverage to larger rooms, the MXW neXt is the premier wireless audio solution for meeting and training rooms.
Shure
Product Benefits Advanced digital wireless transmission technology enables clear, intelligible voices. The built-in IntelliMix® DSP supports auto-mixing, echo cancellation, noise reduction, automatic gain control, and EQ to eliminate distractions and achieve flawless audio mixing. Support for industry-standard security protocols and standards, and encryption of wired and wireless connections protect sensitive content.
– Rechargeable microphones, with 19-39 hours of battery life, eliminate the need for disposable batteries and store in the dock so they’re ready for a full day of use once charged.
– Automatic wireless frequency management helps find free frequencies and automatically avoid interference.
– Select Presentation, Conference, Direct, or Custom mode to instantly configure the system based on usage.Microphones that work for
you Choose bodypack transmitters for hands-free presentations, handheld microphones to hand out for Q&A, or gooseneck microphones to sit on the table or lectern
Extend audio coverage into large roomsCombine multiple MXW neXt systems for larger groups. Add an MXA ceiling mic to cover students or audience members who need to be heard by remote participants.
You are in control
The control knob on each MXW neXt transmitter can be programmed as push-to-talk, push-to-mute or push-on/push-off, and can control a mic, all mics, or the output of an external audio DSP. You can also control the mics remotely from your room control system.
Note: MXWND4 or MXWNDX4G stations allow not only charging but also pairing of microphones to the MXW APTX4 access point
SKU: n/a -
Conference & Discussion Systems, MXW NEXT
Access Point – 8 Ch. MXWAPX8-Z11
Key Points
The MXWAPX8=-Z11 is an 8-channel access point (transceiver) for use with MXW neXt wireless transmitters.
– Analog, Dante, and USB-C audio connections.
– Onboard IntelliMix audio DSP with automatic mixing, echo cancellation, noise reduction, automatic gain and EQ control.
– Automatic frequency management function scans the spectrum, selects an available channel, and automatically changes channels in case of interference.
Overview
The MXW neXt wireless microphone system is a new step in audio for hybrid events. With state-of-the-art wireless transmission, convenient charging, powerful audio processing, and flexible controls and connections, it’s the most versatile wireless audio solution for collaboration. The Microflex® Wireless neXt system is the perfect solution for flexible meeting rooms where seating configurations can change, rooms where audio cables are not practical or rooms that are only used occasionally.
Details
Isn’t every event partly hybrid today?
Nowadays, every meeting, course, or training session includes a mix of in-person and remote participants. The MXW neXt wireless microphone system delivers pristine sound to those in the room and those connecting remotely, whether it’s a presentation, a team meeting, or a training session.
The MXW neXt eliminates annoying audio cables, allowing you to place microphones wherever you want, whenever you want. Wireless microphones fit any table layout or meeting format, whether it’s a presentation, a group discussion, or a board meeting.
With a choice of rechargeable microphones that eliminate the need for disposable batteries, powerful IntelliMix DSP for exceptional sound quality, and the ability to extend audio coverage to larger rooms, the MXW neXt is the premier wireless audio solution for meeting and training rooms.
Shure
Product Benefits Advanced digital wireless transmission technology enables clear, intelligible voices. The built-in IntelliMix® DSP supports auto-mixing, echo cancellation, noise reduction, automatic gain control, and EQ to eliminate distractions and achieve flawless audio mixing. Support for industry-standard security protocols and standards, and encryption of wired and wireless connections protect sensitive content.
– Rechargeable microphones, with 19-39 hours of battery life, eliminate the need for disposable batteries and store in the dock so they’re ready for a full day of use once charged.
– Automatic wireless frequency management helps find free frequencies and automatically avoid interference.
– Select Presentation, Conference, Direct, or Custom mode to instantly configure the system based on usage.Microphones that work for
you Choose bodypack transmitters for hands-free presentations, handheld microphones to hand out for Q&A, or gooseneck microphones to sit on the table or lectern
Extend audio coverage into large roomsCombine multiple MXW neXt systems for larger groups. Add an MXA ceiling mic to cover students or audience members who need to be heard by remote participants.
You are in control
The control knob on each MXW neXt transmitter can be programmed as push-to-talk, push-to-mute or push-on/push-off, and can control a mic, all mics, or the output of an external audio DSP. You can also control the mics remotely from your room control system.
Note: MXWND8 or MXWNDX8G stations allow not only charging but also pairing of microphones to the MXW APTX8 access point
SKU: n/a -
Accessories, MXW NEXT
Access Point/Charger – 2 Ch. MXWAPXD2E-Z11
The next step in audio for hybrid events.
- Built-in charging slots for two MXW1X bodypack, MXW2X handheld, or MXW6X boundary transmitters
- Automatic Frequency Management finds open channels in the 1.9 GHz DECT band and avoids interference without interrupting audio
- Onboard IntelliMix® DSP includes automatic mixing, echo cancellation, noise reduction, and automatic gain control to eliminate annoying distractions
- Presets configure the system for presentations or conferences to send mic & program audio to remote participants, room loudspeakers, or both
- Analog, Dante, and USB-C interfaces for easy connection to a computer, sound system, and videoconferencing codec
- Dual RJ45 network ports allow Dante audio and control signals to be separated for increased security
- External USB-C power supply
SKU: n/a -
Wireless System
ACTIVE DIRECTIONAL ANTENNA 470-900MHz UA874WB
- Shure quality, ruggedness, and reliability
- Compatible with Shure wireless receivers and antenna distribution systems that provide 10 to 15 VDC bias current
- Four-position gain selector switch
- Integrated threaded adapter mounts easily to microphone stands
- Low-noise signal amplifier compensates for insertion loss in coaxial cable
SKU: n/a -
Wireless System
AD BP 470-636 MHz AD1-G56
- Two transmission modes: Standard for optimal coverage and new High Density for maximum system channel count and robust coverage
- Encryption-enabled, secure transmission
- Two connector options: TA4 and LEMO3
- Detachable ¼-wave antenna
- AA or SB900C lithium-ion rechargeable batteries for convenient power options
- External contacts for docked charging
The AD1 is a wireless bodypack transmitter compatible with Axient® Digital Wireless Systems.
With breakthrough RF performance and wide tuning up to 184 MHz, the AD1 puts professional-quality wireless digital audio within reach.
When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
SKU: n/a -
Wireless System
AD BP 606-694 MHz AD1-K55
- Two transmission modes: Standard for optimal coverage and new High Density for maximum system channel count and robust coverage
- Encryption-enabled, secure transmission
- Two connector options: TA4 and LEMO3
- Detachable ¼-wave antenna
- AA or SB900C lithium-ion rechargeable batteries for convenient power options
- External contacts for docked charging
The AD1 is a wireless bodypack transmitter compatible with Axient® Digital Wireless Systems.
With breakthrough RF performance and wide tuning up to 184 MHz, the AD1 puts professional-quality wireless digital audio within reach.
When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
SKU: n/a
































