8124 In-Ceiling Loudspeaker – JBL PRO
General Specifications
- Component
- 4 in (100 mm), full-range driver
- Frequency Range
- 60 Hz – 18 kHz
- Sensitivity
- 93 dB (1 kHz – 8 kHz), 1W, 1M
- Coverage
- 130° conical
- 70V/100V Taps
- 6W, 3W, 1.5W (0.75W at 70V only)
- Termination
- Bare wires
- Nominal Driver Impedance
- 8 ohms
- Driver Power Capacity
- 20 W
- Plenum Usage
- Not intended for use in return air plenums
- Included Accessories
- Sculpted Grille
- Optional Accessories
- MTC-8124C C-ring, MTC- Rail tile rails
Dimensions
- Diameter
- 8.1 in (206 mm)
- Depth
- 3.5 in (89 mm)
- Weight
- 2.5 lb (1.2 kg)
- Cutout Dimension
- 175 mm diameter (6.9 in)
Digital Audio Interface MVI-DIG
DOMED HELICAL ANTENNA HA-8091
The HA-8091 Domed Helical Antenna offers unparalleled drop-out free RF performance for IEM, wireless mics and intercoms. Domed Helical Antennas are part of a new generation of antennas that provide greater bandwidth, longer range, greater reliability and more flexibility than other antennas. Unlike traditional whip and other antennas which transmit and receive signals in a single polarization, the circular motion of the RF field emitted by a helical antenna distributes the signal through all possible polarization, greatly reducing the risk of drop-outs. The high gain ensures the strongest possible signal.
Typical antennas for performing artists, whether for IEM or wireless mic applications, often are 1/4 wave whip antennas with a fixed polarization. Any movement of the wireless device and its antenna, with respect to the corresponding receive or transmitter antenna, can result in a polarization shift that can easily cause RF dropouts. With the HA-8091, the RF energy rotates through all 360 degrees of polarization, providing crystal clear reception in the artist’s ears and in the wireless mics receiver no matter how they may move about or where they go on the stage.
This makes the HA-8091 Domed Helical Antenna particularly useful in large scale events, where it may be virtually impossible to control the orientation of both the sending and receiving ends of the wireless communication. It can be used as either a transmitting antenna or a receiving antenna where it excels in either application.
EON ONE COMPACT – JBL PRO
EON208P Packaged 8″ 2-Way PA with Powered 8-Channel Mixer and Bluetooth®
Portable Design
EON208P puts professional audio within arm’s reach—literally. The twin 8” speakers and 8-channel mixer clip together to form the most comprehensive, lightweight and portable PA in its class. Carry it in one hand with a guitar slung over your shoulder to play coffee shops and medium-size gigs. Or turn a backyard into the hottest nightclub around. With uncompromising JBL sound quality and effortless portability, you’ll want to take it everywhere. The versatile enclosures facilitate stacking, pole mounting and use in monitor position.
Head Worn Microphone for Wireless SM35-TQG
About this item
IRX108BT Powered 8-inch Portable PA Loudspeaker With Bluetooth
The JBL IRX108BT portable powered PA loudspeaker delivers class-leading volume and clarity, total ease of use and an unrivaled feature set at our most affordable price point. Sound amazing with a custom, pro-grade system engineered to outperform larger competing systems. Real-world EQ presets let you dial in optimal tone in an instant—no experience necessary—and built-in dbx DriveRack automatic feedback suppression lets you crank it up with confidence. Play music, soundtracks and backing tracks with Bluetooth audio streaming, and ensure your voice carries over background music with one-touch ducking. Two mic/line combo inputs and an XLR loop-out round out this lightweight, durable PA.
KSM44A/SL – MICROPHONE, CONDENSER, MULTIPLE PATTERN
Overview
The KSM44A is a premium, large-diaphragm, side-address condenser microphone with multiple polar pattern options (cardioid, omnidirectional,
bidirectional). The refined and sophisticated design of the KSM44A features an externally biased, dual 1-inch diaphragms, extensive internal pop
filtering and Prethos™ Advanced Preamplifier Technology for a ground-breaking threshold minimum of self-noise. The KSM44A is the premier choice
for the highest level of professional studio and stage performance.
Features
• A milestone technical achievement, Shure’s Prethos™ Advanced Preamplifier Technology provides 4dB of self-noise and max SPL of 131 dB for a
total dynamic range of 127 dB – an increase of 7 dB that defines the new standard for cleanly nuanced audio capture
• Multiple polar patterns–cardioid, omnidirectional and bidirectional–for maximum flexibility in a wide variety of recording applications
• Dual 1 inch, externally biased, ultra-thin, 2.5 μm, 24 Karat gold-layered, low mass diaphragms provide superior transient response
• Class A, discrete, transformerless preamplifier for transparency, extremely wide frequency response and no crossover distortion. Minimizes har
monic and intermodulation distortions.
• Premium electronic components and gold-plated internal and external connectors
• Subsonic filter eliminates rumble from mechanical vibration below 17 Hz.
• Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
• 3-position switchable low-frequency filter helps reduce unwanted stand vibration noise or counteract proximity effect
• Integrated three-stage “pop” protection grille reduces plosives and other breath noise
Loudspeaker, mini pendant, black MXP-1B
Big Audio in a Small Package
Dial In Great Sound
Quick and Easy Installation
Confident Communication
Certified For Success
-
Lavalier, headset & Earset
MVL Lavalier Microphone for Smartphone or Tablet MVL-3.5MM
- Compatibility with the ShurePlus MOTIV Mobile Recording App and other iOS audio and video recording apps
- Sleek form factor for discreet appearance
- Plugs into headphone jack via a 1/8” (3.5mm) TRRS connector
- Omnidirectional microphone with exceptional signal-to-noise ratio
- Includes windscreen, clothing clip, and carrying pouch
- For use with iOS and Android** devices
Simply clip the MVL Omnidirectional Lavalier Microphone to your collar or lapel and plug it into your mobile device to capture clear, quality audio for interviews, lectures, public speaking, and videography. With the free ShurePlus™ MOTIV™ iOS app, you can edit your recordings and share your sound files via text, email and other file sharing services.
SKU: n/a -
Instrument Mics
54PC DRUMKIT PGA52, 57, 56 (X2) PGADRUMKIT4
- 1 x PGA52 Cardioid Dynamic Kick Drum Microphone
- 3 x PGA56 Cardioid Dynamic Microphone for Snare/Tom
- 1 x PGA57 Cardioid Dynamic Instrument Microphone
- 2 x PGA81 Cardioid Condenser Instrument Microphone
- 3 x A25D Mic Clamp
- 3 x AP56DM Circle Stand for Mounting on Drum Shells
- 7 x XLR-XLR Cables 4.6m
- 1 x Carrying Case
SKU: n/a -
Instrument Mics
66PC DRUMKIT PGA52, 57, 56(X2), 81(X2) PGADRUMKIT6
The PGADRUMKIT7 Drum Microphone Kit is a complete set of professional-grade microphones, designed to provide excellent sound for performance and battery recording. The PGADRUMKIT7 includes a PGA52 drum microphone, three PGA56 drum microphones, a PGA57 instrument microphone, and two PGA81 instrument microphones, as well as three drum stands, seven XLR-XLR cables, and a carrying case.
- 1 x PGA52 Cardioid Dynamic Kick Drum Microphone
- 3 x PGA56 Cardioid Dynamic Microphone for Snare/Tom
- 1 x PGA57 Cardioid Dynamic Instrument Microphone
- 2 x PGA81 Cardioid Condenser Instrument Microphone
- 3 x A25D Mic Clamp
- 3 x AP56DM Circle Stand for Mounting on Drum Shells
- 7 x XLR-XLR Cables 4.6m
- 1 x Carrying Case
SKU: n/a -
Instrument Mics
7PC DRUMKIT PGA52, 57, 56(X3), 81(X2) PGADRUMKIT7
The PGADRUMKIT7 Drum Microphone Kit is a complete set of professional-grade microphones, designed to provide excellent sound for performance and battery recording. The PGADRUMKIT7 includes a PGA52 drum microphone, three PGA56 drum microphones, a PGA57 instrument microphone, and two PGA81 instrument microphones, as well as three drum stands, seven XLR-XLR cables, and a carrying case.
- 1 x PGA52 Cardioid Dynamic Kick Drum Microphone
- 3 x PGA56 Cardioid Dynamic Microphone for Snare/Tom
- 1 x PGA57 Cardioid Dynamic Instrument Microphone
- 2 x PGA81 Cardioid Condenser Instrument Microphone
- 3 x A25D Mic Clamp
- 3 x AP56DM Circle Stand for Mounting on Drum Shells
- 7 x XLR-XLR Cables 4.6m
- 1 x Carrying Case
SKU: n/a -
Instrument Mics
STUDIO KIT : 4PC (PGA52, PGA57, 2 PGA181) PGASTUDIOKIT4
The PGASTUDIOKIT4 Microphone Kit is a versatile set of professional-grade microphones, composed to provide excellent sound for recording and picking up amplified and acoustic instruments. The microphones selected for the PGASTUDIOKIT4 offer a wide variety of flexible solutions suitable for most recording situations. The STUDIOKIT4 includes a PGA52 drum microphone, a PGA57 instrument microphone, and two PGA181 microphones, as well as four XLR-XLR cables and a carrying pouch.
SKU: n/a -
MICROPHONES
SM58 Vocal Microphone SM58-LCE
If you’ve ever heard someone sing or speak into a live microphone, there’s an excellent chance it was an SM58. Rock stars. Pop idols. Comedians. Presidents. Popes. Immortal words have passed through its iconic grille for generations. And with engineering and durability that set the world standard, it’s sure to keep turning up at legendary performances.
A legend that cuts through the noise.
- Frequency response tailored for vocals, with brightened midrange and bass rolloff
- Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise
- Pneumatic shock-mount system cuts down handling noise
- Effective, built-in spherical wind and pop filter
- Supplied with break-resistant stand adapter which rotates 180 degrees
- Legendary Shure quality, ruggedness and reliability
- Cardioid (unidirectional) dynamic
- Frequency response: 50 to 15,000 Hz
- Replacement cartridge: R59
The legendary Shure SM58 vocal microphone is designed for professional vocal use in live performance, sound reinforcement, and studio recording. Its tailored vocal response for sound is a world standard for singing or speech. A highly effective, built-in spherical filter minimizes wind and breath “pop” noise. A unidirectional (cardioid) pickup pattern isolates the main sound source while minimizing unwanted background noise.
Rugged construction, a proven shock-mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently, outdoors or indoor
SKU: n/a -
MICROPHONES
SM63 Dynamic Microphone SM63
- Its natural low-frequency cut-off and patented internal suspension are very effective in reducing wind and handling noise.
- Uniform, ample frequency response is specifically designed for optimal intelligibility
- Dual coil isolates the microphone from humming electromagnetic fields
- High output level, low impedance
- Extremely robust VERAFLEX grille that resists drops, oxidation and moisture
- Built-in pop filter reduces breathing and wind noise
- The SM63L and SM63LB have a two-layer windscreen, specially made for outdoor use.
- Perfect balance for wrist and hand use
- Media adapter included
- Neat appearance that fits perfectly on stage or in the image.
The SM63 series dynamic omni-directional microphones with high output levels are both elegant and robust. Designed for professional applications, they are perfectly suited to interviews, especially those that take place outdoors.
The three models differ only in length and colour:
The SM63 is designed for use by hand on stage and in (TV) studios.The SM63L and SM63LB are perfect for remote interviews, sports broadcasts, and other situations where longer microphones are desirable.
All three models are equipped with a Shure-patented vibration damping system to minimize handling noise.
These microphones are equipped with a VERA-FLEX grille that provides protection against drops of up to two meters high, and is resistant to shock, oxidation, degradation and moisture. An integral pop filter effectively reduces breathing noise.
The SM63L and SM63LB have a two-layer windscreen, specially made for outdoor use.
- SM63 – In champagne, handle: 14.5 cm, exclusive cable
- SM63L – In champagne, extended handle: 23 cm, exclusive cable
- SM63LB – In black, extended handle: 23 cm, exclusive cable.
SKU: n/a -
MICROPHONES
SM63 Dynamic Microphone SM63L
Omnidirectional dynamic reportage microphone, robust, lightweight and aesthetic, suitable for outdoor interviewing. Its frequency response is optimized to promote intelligibility.
- Its natural low-frequency cut-off and patented internal suspension are very effective in reducing wind and handling noise.
- Uniform, ample frequency response is specifically designed for optimal intelligibility
- Dual coil isolates the microphone from humming electromagnetic fields
- High output level, low impedance
- Extremely robust VERAFLEX grille that resists drops, oxidation and moisture
- Built-in pop filter reduces breathing and wind noise
- The SM63L and SM63LB have a two-layer windscreen, specially made for outdoor use.
- Perfect balance for wrist and hand use
- Media adapter included
- Neat appearance that fits perfectly on stage or in the image.
The SM63 series dynamic omni-directional microphones with high output levels are both elegant and robust. Designed for professional applications, they are perfectly suited to interviews, especially those that take place outdoors.
The three models differ only in length and colour:
The SM63 is designed for use by hand on stage and in (TV) studios.The SM63L and SM63LB are perfect for remote interviews, sports broadcasts, and other situations where longer microphones are desirable.
All three models are equipped with a Shure-patented vibration damping system to minimize handling noise.
These microphones are equipped with a VERA-FLEX grille that provides protection against drops of up to two meters high, and is resistant to shock, oxidation, degradation and moisture. An integral pop filter effectively reduces breathing noise.
The SM63L and SM63LB have a two-layer windscreen, specially made for outdoor use.
- SM63 – In champagne, handle: 14.5 cm, exclusive cable
- SM63L – In champagne, extended handle: 23 cm, exclusive cable
- SM63LB – In black, extended handle: 23 cm, exclusive cable.
SKU: n/a -
MICROPHONES
SM63 Dynamic Microphone SM63LB-X
Its natural low-frequency cut-off and patented internal suspension are very effective in reducing wind and handling noise.
Uniform, ample frequency response is designed specifically for optimal
intelligibility Dual coil to isolate the microphone from hum electromagnetic fields High output
level, low impedance
Extremely robust VERAFLEX grille that resists drops, oxidation and humidity
Built-in pop filter that reduces breathing and wind
noise The SM63L and SM63LB have a two-layer windscreen, specially made for outdoor use.
Perfect balance for wrist and hand
use Bracket adapter included
Neat look that fits perfectly on stage or picture.
The SM63 series dynamic omni-directional microphones with high output levels are both elegant and robust. Designed for professional applications, they are perfectly suited to interviews, especially those that take place outdoors.The three models differ only in length and colour:
The SM63 is designed for use by hand on stage and in (TV) studios.The SM63L and SM63LB are perfect for remote interviews, sports broadcasts, and other situations where longer microphones are desirable.
All three models are equipped with a Shure-patented vibration damping system to minimize handling noise.
These microphones are equipped with a VERA-FLEX grille that provides protection against drops of up to two meters high, and is resistant to shock, oxidation, degradation and moisture. An integral pop filter effectively reduces breathing noise.
The SM63L and SM63LB have a two-layer windscreen, specially made for outdoor use.
SM63 – In champagne, handle: 14.5 cm, exclusive SM63L cable
– In champagne, extended handle: 23 cm, exclusive SM63LB cable
– In black, extended handle: 23 cm, exclusive cable.SKU: n/a -
Instrument Mics
SM81 Condenser Instrument Microphone SM81-LC
The legendary SM81 is a cardioid condenser microphone with a wide frequency response and low self-noise.
- Frequency response from 0 Hz to 20,000 Hz.
- Uniform response curve for accurate reproduction of sound sources.
- Very low self-noise and high output level.
- Very little affected by variable load impedances.
- Cardioid polar pattern, uniform frequency and symmetrical axis, for maximum rejection and minimal distortion of off-axis sounds.
- Low susceptibility to radio frequencies.
- Switchable low-cut filter in three positions: neutral, -6dB/octave or -18 dB/octave.
- -10 dB attenuator with lock-in.
- Phantom power (DIN 45, 596, voltage of 12V or 48V)
- Heavy-duty steel construction.
- Ideal for outdoor use in a variety of temperature and humidity conditions.
Why is SM81 the most suitable?
The SM81 is the perfect choice for a professional musician or sound technician who is looking for a microphone for acoustic instruments (e.g. acoustic guitar, piano, cymbals, etc.). It is ideal for recording sound on stage, and thanks to its high quality, it can be regularly recorded in the studio, thanks to its high quality.
What features can I expect from an SM81?
The SM81 has a uniform frequency response curve for accurate reproduction of the sound source. It is also equipped with a three-position switchable low-cut filter. Its -10 dB attenuator with lock allows for additional flexibility for picking up loud sound sources. In addition, it has a cardioid polar pattern that isolates the main sound source and reduces background noise at the same time.
SKU: n/a -
Instrument Mics
Drum Microphone KIT : 7PC (3 SM57, 1 BETA52A, 3 A56D)DMK57-52
The DMK57-52 is a drum kit for professional musicians consisting of 4 microphones. 3xSM57, dynamic microphones for snare drums and toms and 1xBETA52 for kick drum.
- 3 x SM57 dynamic microphones for snare drums and toms.
- 1 x BETA52A dynamic kick drum microphone.
- 3 x A56D Universal Battery Mounting System.
- Comes in a sturdy box.
Who is it best suited for?
The DMK57-52 is a drum microphone kit that is aimed directly at professional musicians who want a solid base for sounding the core elements of their drums (kick drum, snare drum, toms). It will be perfectly suitable in the majority of situations, concerts, recordings…
What does the DMK57-52 kit case contain?
- 3 x SM57 dynamic microphones for snare drums and toms.
- 1 x BETA52A dynamic kick drum microphone.
- 3 x A56D Universal Battery Mounting System.
- Comes in a sturdy box.
Other complete microphone solutions for your drum kit:
- PGDMK4: Four-component battery microphone set with PG microphones
- PGDMK6: Six-component battery microphone set with PG microphones.
SKU: n/a -
MICROPHONES
PGA58-XLR Cardioid Dynamic Vocal Microphone
The PGA58 delivers excellent sound for lead and backup vocal performance. Available with various cable options and a discrete On / Off switch.
- Tailored microphone cartridge design for natural clarity in the frequency range of vocal performance
- Cardioid polar pattern picks up audio from the source while rejecting unwanted noise
- Updated industrial design with black metallic finish and grille for unobtrusive visual presence
- On/Off switch for discrete control of microphone operation
- Stand adapter for mounting to a microphone stand
- Legendary Shure quality design and construction for exceptional performance in rigorous environments
The PGA58 is a professional quality vocal microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Legendary Shure quality construction ensures exceptional performance in rigorous environments.
SKU: n/a -
MICROPHONES
BETA 58A Vocal Microphone
Round sound. Powerful sound. Sophisticated sound. Is your microphone at the height of your voice? For decades, the BETA® 58A has been ahead of its competitors, bringing the voice of artists to the world’s biggest stages. It’s the mic you need for sound that captivates your audience.
Precision. Power. Presence.
- Voice-optimized frequency response, with clear mids and bass attenuation to avoid the proximity effect.
- Uniform supercardioid polar pattern for high gain before feedback and excellent off-axis sound rejection.
- Neodymium magnet for high signal-to-noise ratio.
- Hardened steel grille resistant to wear and abuse.
- Advanced pneumatic anti-shock system reduces the transmission of mechanical noise and vibration.
- Low sensitivity to changes in load impedance.
- Legendary Shure quality and reliability.
Why is Beta 58A the most suitable?
The Beta 58A is a first-choice vocal microphone for lead vocals or backing vocals, both on stage and in the studio. Also available in the Beta Wireless version.
What’s the difference with the legendary SM58?
Both were designed for singers and have clear mids and unwanted low-frequency attenuation. The Beta 58A has greater sensitivity and a more precise frequency response, allowing it to produce clearer and more detailed sound. Compared to the cardioid SM58, the Beta 58A has a supercardioid polar pattern, which allows it to be more resistant to feedback.
SKU: n/a -
MICROPHONES
VP64AL : VP64 Microphone for A/V production, extended handle
A sleek microphone with an ergonomic design, the VP64 is equipped with a Neodymium magnet for a high level of output. Its optimized frequency response provides high voice intelligibility.
- Frequency Range: 50 Hz to 12 kHz
- Neodymium magnet for high output level and optimized signal-to-noise ratio
- Custom-made frequency response, with peak in the high-mids, for optimal clarity in vocal picking
- Omni-directional polar pattern eliminates the problem caused by proper microphone positioning
- Internal insulation to prevent handling noise
- Sealed grate that discharges water in the most demanding weather conditions
- Windscreen provided
- Shure’s Legendary Ruggedness
The VP64A and VP64AL are high-output, omni-directional handheld dynamic microphones manufactured for professional AV productions.
They combine outstanding performance and comfort with a sleek design for the cameras. The only difference between the VP64A and VP64L is the body length. The length of the VP64A (200mm) is perfect for use in close-ups and close-ups – both indoors and outdoors.
The VP64AL is perfect for interviews, sports broadcasts and any other situations where a length of 244 mm is useful. The omni-directional polar pattern allows for uniform pickup of sound, whether it comes from the axis or elsewhere, which greatly facilitates the positioning of the microphone.
The VP64A series features a specially designed frequency response to provide high speech intelligibility. The capsule uses a neodymium magnet and therefore benefits from a higher output level and a very good signal-to-noise ratio. Internal rubber isolation protects the microphone capsule and minimizes handling noise. Thanks to its waterproof grille, the microphone can be used in the most demanding weather conditions. The included windscreen is effective in reducing parasitic noise (cough/pop) and wind.
SKU: n/a -
MICROPHONES
VP64A : VP64 Microphone for A/V production
A sleek microphone with an ergonomic design, the VP64 is equipped with a Neodymium magnet for a high level of output. Its optimized frequency response provides high voice intelligibility.
- Frequency Range: 50 Hz to 12 kHz
- Neodymium magnet for high output level and optimized signal-to-noise ratio
- Custom-made frequency response, with peak in the high-mids, for optimal clarity in vocal picking
- Omni-directional polar pattern eliminates the problem caused by proper microphone positioning
- Internal insulation to prevent handling noise
- Sealed grate that discharges water in the most demanding weather conditions
- Windscreen provided
- Shure’s Legendary Ruggedness
The VP64A and VP64AL are high-output, omni-directional handheld dynamic microphones manufactured for professional AV productions.
They combine outstanding performance and comfort with a sleek design for the cameras. The only difference between the VP64A and VP64L is the body length. The length of the VP64A (200mm) is perfect for use in close-ups and close-ups – both indoors and outdoors.
The VP64AL is perfect for interviews, sports broadcasts and any other situations where a length of 244 mm is useful. The omni-directional polar pattern allows for uniform pickup of sound, whether it comes from the axis or elsewhere, which greatly facilitates the positioning of the microphone.
The VP64A series features a specially designed frequency response to provide high speech intelligibility. The capsule uses a neodymium magnet and therefore benefits from a higher output level and a very good signal-to-noise ratio. Internal rubber isolation protects the microphone capsule and minimizes handling noise. Thanks to its waterproof grille, the microphone can be used in the most demanding weather conditions. The included windscreen is effective in reducing parasitic noise (cough/pop) and wind.
SKU: n/a
