DSP, Mixers & Network Interfaces
4CH MIC/LINE IN-DNTE+LGC,1/3RU,BLOCK ANI4IN-BLOCK
Powerful audio conversion for any system design
- Single Ethernet port carries Dante audio, power (PoE – class 0)
- LEDs indicate device status and audio signal
- Control strings for third-party preset controllers including Crestron® and AMX®
- 4 Band C/S PEQ on every channel
- Provides channel summing to combine input signals and send them over a single Dante™ channel
- Browser-based software control for all device parameters, per input channel:
- Preamp gain
- Mute control
- Digital gain
- Polarity control
- Phantom power
- 1/3 Rack unit wide
- Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs
- Available in block connector (audio + logic) and standard XLR variations
Converts up to four line / mic analog signals onto a Dante network for easy audio routing and browser-based control.
View the ANI4IN-XLR and ANI4IN-BLOCK Software GUI Demos.
12.700,00 د.م.
Produits similaires
-
DSP, Mixers & Network Interfaces
Digital Audio Interface MVI-DIG
- Digital audio interface connects a professional XLR microphone or 1/4″ instrument output to a computer or mobile device
- 5 DSP preset modes for EQ, compression, limiter settings, gain control, mute, and volume, and phantom power
- 5 DSP preset modes (speech, singing, flat, acoustic instrument, loud) for EQ, compression, and limiter settings
- Touch panel provides control for gain, mute, and headphone volume
- Manual audio settings can be adjusted via iOS devices with Lightning Connector, using the ShurePlus MOTIV app
- JFET Class A buffered instrument preamplifier input for exceptional tone and clarity
- Combined XLR microphone and 6.3 mm instrument input
SKU: n/a -
DSP, Mixers & Network Interfaces
DriveRack PA2 – DRPA2 Complete Loudspeaker Management System
Features
- All New Setup Wizard
- Streamlined AutoEQ™
- All New AFS™ (Advanced Feedback Suppression)
- Mobile Control (Android®, iOS®, Mac®, Windows®)
- dbx Compression
- Graphic EQ
- 8-Band Parametric EQ (adjusted when using the AutoEQ) Input
- Subharmonic Synthesis
- Crossover (supports full range, 2-way, and 3-way systems)
- 8-Band Parametric EQs (used for speaker tunings) Output
- dbx Limiting
- Driver Alignment Delays
SKU: n/a -
DSP, Mixers & Network Interfaces
4CH MIC/LINE OUT-DNTE,1/3RU,XLR ANI4OUT-XLR
- Single Ethernet port carries Dante audio, power (PoE – class 0)
- LEDs indicate device status and audio signal
- Control strings for third-party preset controllers including Crestron® and AMX®
- 4 Band C/S PEQ on every channel
- Provides channel summing to combine Dante™ signals from the network and send them over a single analog output
- Browser-based software control for all device parameters, per output channel:
- Mute control
- Digital gain
- Polarity control
- 1/3 Rack unit wide
- Chassis ground screw (BLOCK version only) provides common chassis ground for multiple inputs
- Available in block connector and standard XLR variations
Converts Dante™ digital audio signal to four discrete line / mic analog signals.
SKU: n/a -
DSP, Mixers & Network Interfaces
P300-IMX : AUDIO CONFERENCING PROCESSOR
Don’t let echo, noise, or distortion take over the meeting. The IntelliMix® P300 enhances every aspect of conference audio. Combined with Microflex® Advance™ or Microflex® Wireless microphones, the clear sound reproduction and intelligent mixing keeps the agenda on track with clear communication.
SKU: n/a -
